Recently Updated Pages
Service the Extruder
Service the Hotend
Replace the Filament Cutter
Using the LCD
This guide has been written using An X1 Carbon running firmware version 01.09.00.00 (20250429). I...
Introduction to the HMS
The Health Management System (HMS) is resposible for the monitoring and alerting of the printing ...
Specifications
Item Specification X1-Carbon Printing Technology Fused Deposition Modeling ...
X1C Specific G-Code
Bambu Labs has partially implemented Marlin G-Code commands and have added their own custom G-Cod...
3D Filaments for Beginners
When starting on your 3d printing journey you will be overwelmed with choices on filament that is...
Initial Printer Setup
After you unbox your brand new X1 3D printer, you need to go through the initial setup process. H...
Multi-Colour Printing Operation Guide
When using a 0.2mm nozzle for multi-colour printing, it's important to be aware that the filament...
Manual Loading / Unloading
Steps to load filament Set the hotend temperature based on the filament you are ...
Introduction to Fused Deposition Modeling (FDM)
The Process Fused Deposition Modeling (FDM) is an additive manufacturing process where an obje...
Introduction to CoreXY
CoreXY provides a fundamental building block of many computerized fabrication tools - cartesian m...
Connecting AMS to the Printer
Single AMS Setup Take the PTFE tube from inside the AMS unit, and connect it from the bl...
Introduction to HMS2 HT
Optional Accessories
PTFE adapter PTFE tube can connect 4 feed tubes to the printer at the same time. When connecting...
Introduction to AMS
How does AMS work? The AMS consists of three major parts: a set of four Filament Slots, a Filame...
Acknowlegments
Bambu Studio I would like to acknowledge that portions of this document were based off the WIKI ...
Main Components
Front View 1. Touchscreen This component allows for touch interaction with the printe...
Introduction to the X1 Carbon
How does X1 work? The X1 Carbon is a FFF (Fused Filament Fabrication) 3D Printer or FDM (fused ...